• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • DeWALT DCE088D1G-GB - 10.8V CROSS LINE LASER GREEN
      DeWALT - 10.8V CROSS LINE LASER GREEN Model # DCE088D1G-GB

     
    • 10.8 V lithium-ion rechargeable power tool battery platform
    • Green beam laser technology
    • Crossing horizontal and vertical lines.
    DeWALT DCE088D1R-GB - 10.8V CROSS LINE LASER  RED
      DeWALT - 10.8V CROSS LINE LASER RED Model # DCE088D1R-GB

     
    • 10.8 V lithium-ion rechargeable power tool battery platform
    • Red beam laser technology
    • Crossing horizontal and vertical lines.
    DeWALT DCE089D1R-GB - 10.8V Self Level Multi Line Laser Red
      DeWALT - 10.8V Self Level Multi Line Laser Red Model # DCE089D1R-GB

     
    • 10.8 V lithium-ion rechargeable power tool battery platform
    • Red beam laser technology
    • Three 360 degree line laser to aid in full room layout
    DeWALT DCE089D1G-GB - 10.8V Self Level Multi Line Laser Green
      DeWALT - 10.8V Self Level Multi Line Laser Green Model # DCE089D1G-GB

     
    • Green Beam Laser Technology – Four times brighter green laser technology for visibility in long range interior applications and exterior visibility
    • 10.8v Lithium-ion Rechargeable Power Tool Battery Platform For extra long run time and the convenience of rechargeable power tool batteries
    • Self-levelling multi line laser is accurate to ñ0.3 mm/m in levelling applications
    DeWALT DW079PKH-QW - Horizontal and Vertical Rotary Laser Kit
      DeWALT - Horizontal and Vertical Rotary Laser Kit Model # DW079PKH-QW

     
    • Fully self-levelling horizontal and vertical rotary laser for internal and external applications
    • Levelling accuracy of 0.1 mm/m combined with DEWALT durability
    • Multi-voltage compatibility with 9.6 ? 18 Volt (NiCd / NiMH / Li-ion) DEWALT battery packs
    DeWALT DW083K-XJ - 3-Beam Laser Pointer
      DeWALT - 3-Beam Laser Pointer Model # DW083K-XJ

     
    • Self leveling 3 beam laser; accurate to +/-0.2mm/m
    • Self leveling up to 4 degrees surface angle
    • One button operation – fast and easy operation of laser
    DeWALT DW0851-XJ - Multi-Beam 5 points Laser Pointer + 1 Backline
      DeWALT - Multi-Beam 5 points Laser Pointer + 1 Backline Model # DW0851-XJ

     
    • Projects 5 bright spot beams for accurate plumb and horizontal point transfer
    • Range : 30M – Accuracy : +/- 3mm/15m
    • Self Leveling Spot Beams and Horizontal Line – Rear projecting horizontal line aids in additional leveling applications
    DeWALT DW03050-XJ - Laser Distance Meter 50m (165ft)
      DeWALT - Laser Distance Meter 50m (165ft) Model # DW03050-XJ

     
    • The unit has a flat base that gives a solid platform to measure without the unit shaking and moving to help avoid measuring errors.
    • Laser distance measurer (LDM) manufactured to withstand the inevitable job site drops and falls on the Job site
    • It has a range of up to 50 m and an accuracy of +/- 1;5 mm
    DeWALT DW089KTRI-XJ - Multi Line Laser with New Tripod
      DeWALT - Multi Line Laser with New Tripod Model # DW089KTRI-XJ

     
    • Self-levelling multi line laser is accurate to ñ0.3 mm/m in levelling applications
    • Self-Levelling up to 4 degrees surface angle with automatic out of level indication; marks a levelled line in seconds
    • 3 button operation and low battery indication for ease of use
    DeWALT DW03101-XJ - Laser Distance Meter 100m (330ft)
      DeWALT - Laser Distance Meter 100m (330ft) Model # DW03101-XJ

     
    • Laser distance measurer (LDM) manufactured to withstand the inevitable job site drops and falls on the Job site
    • It has a range of up to 100m and an accuracy of +/- 1mm
    • Common end-user functions : linear meter readings; surface and volume calculations. It will add or subtract readings and calculate distance in Metric and Imperial.
    DeWALT DW088KTRI-XJ - Multi Line Laser With New Tripod; 50ft Range
      DeWALT - Multi Line Laser With New Tripod; 50ft Range Model # DW088KTRI-XJ

     
    • Line laser, self leveling with double switch and oversized body. Equipped with magnetic mounts and aluminum tripod.
    • Self levelling up to 4°surface angle with automatic out of level indication.
    • 2 button operation and low battery indication for ease of use.
    DeWALT DW088K-XJ - Self Levelling Cross Line Laser
      DeWALT - Self Levelling Cross Line Laser Model # DW088K-XJ

     
    • Self-levelling cross line laser is accurate to ñ0.3 mm/m in levelling applications
    • Self-Levelling up to 4 degrees surface angle with automatic out of level indication; marks a levelled line in seconds
    • 2 button operation and low battery indication for ease of use
    DeWALT DW088K-B5 - 2-Way Self Leveling Cross Line Laser
      DeWALT - 2-Way Self Leveling Cross Line Laser Model # DW088K-B5

     
    • Self-leveling cross line laser is accurate to ñ0.3 mm/m in leveling applications
    • Self-leveling up to 4 degrees surface angle with automatic out of level indication; marks a leveled line in seconds
    • 2 button operation and low battery indication for ease of use
    DeWALT DW096PK-XJ - 26x Auto Level Package
      DeWALT - 26x Auto Level Package Model # DW096PK-XJ

     
    • Magnetically dampened compensator that maintains compensation over product life and for easy setup with optimum range and accuracy
    • 26 x magnification for 100 m+ range
    • 2 mm accuracy (1 km Double Run) for high quality work results
    FLUKE 180LG - 2 Line Laser Level – Green – =60 m / 196FT
      FLUKE - 2 Line Laser Level – Green – =60 m / 196FT Model # 180LG

     
    • Self-leveling; horizontal and vertical-cross line laser level for rapid; accurate leveling and layout
    • Light Source: Semiconductor laser diode
    FLUKE 180LR - 2 Line Laser Level – Red – =60M / 196FT
      FLUKE - 2 Line Laser Level – Red – =60M / 196FT Model # 180LR

     
    • Self-leveling; horizontal and vertical-cross line laser level for rapid; accurate leveling and layout
    • Light Source: Semiconductor laser diode
    FLUKE 3PG - 3 Point Laser Level – Green – =30M / 98FT
      FLUKE - 3 Point Laser Level – Green – =30M / 98FT Model # 3PG

     
    • Self-leveling 3 point laser level allows for fast; accurate layout of reference points
    • Light Source: Semiconductor laser diode
    FLUKE 3PR - 3 Point Laser Level – Red – =30M / 98FT
      FLUKE - 3 Point Laser Level – Red – =30M / 98FT Model # 3PR

     
    • Self-leveling 3 point laser level allows for fast; accurate layout of reference points
    • Light Source: Semiconductor laser diode
    FLUKE 424D - Laser Distance Meter – 100m / 330ft
      FLUKE - Laser Distance Meter – 100m / 330ft Model # 424D

     
    • Versatile laser distance meter that instantly measures up to 100 meters (330 feet) with one-button point-and-click operation
    • Quickly calculates area (square feet/meters) and volume
    EXPERT E003601 - Steel Scriber – 190mm
      EXPERT - Steel Scriber – 190mm Model # E003601

     
    • Tip diameter: 0.4 mm.
    • Body diameter: 8 mm.
    IRWIN 10507787 - Standard measuring tape 3m/10ft
      IRWIN - Standard measuring tape 3m/10ft Model # 10507787

     
    • Standard pocket tape suitable for all kinds of measuring applications
    • Pro touch soft grip case
    • It is a slide lock blade locking devise
    IRWIN 10507788 - Standard measuring tape 5m/16ft
      IRWIN - Standard measuring tape 5m/16ft Model # 10507788

     
    • Standard pocket tape suitable for all kinds of measuring applications
    • Pro touch soft grip case
    • It is a slide lock blade locking devise
    IRWIN 10507789 - Standard measuring tape 8m/26ft
      IRWIN - Standard measuring tape 8m/26ft Model # 10507789

     
    • Standard pocket tape suitable for all kinds of measuring applications
    • Pro touch soft grip case
    • It is a slide lock blade locking devise
    IRWIN T64494LP - Chalk Line Set; Blue 30m/100ft
    IRWIN T64901 - Marking Chalk Blue 8oz
      IRWIN - Marking Chalk Blue 8oz Model # T64901

     
    • Chalk re-fill for chalk line reels. Size: 227gm (8oz).
    • Colour: blue.
    IRWIN T64902 - Marking Chalk Red 8oz
      IRWIN - Marking Chalk Red 8oz Model # T64902

     
    • Chalk re-fill for chalk line reels. Size: 227gm (8oz).
    • Colour: Red
    GROZ VNC/6 - Vernier Caliper 0 to 6in (0-150mm)
      GROZ - Vernier Caliper 0 to 6in (0-150mm) Model # VNC/6

     
    • Useful for inside and outside measurements, depth & step measurements
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ VNC/8 - Vernier Caliper 0 to 8in (0-200mm)
      GROZ - Vernier Caliper 0 to 8in (0-200mm) Model # VNC/8

     
    • Useful for inside and outside measurements, depth & step measurements
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ VNC/12 - Vernier Caliper 0 to 12in (0-300mm)
      GROZ - Vernier Caliper 0 to 12in (0-300mm) Model # VNC/12

     
    • Useful for inside and outside measurements, depth & step measurements
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ DLC/150 - Dial Caliper 0-150mm
      GROZ - Dial Caliper 0-150mm Model # DLC/150

     
    • Vernier Calipers with a large & clear dial read off
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ DLC/200 - Dial Caliper; 0-200mm
      GROZ - Dial Caliper; 0-200mm Model # DLC/200

     
    • Vernier Calipers with a large & clear dial read off
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ EDC/6 - Electronic Caliper; 0-6in (0-150mm)
      GROZ - Electronic Caliper; 0-6in (0-150mm) Model # EDC/6

     
    • Freewheeling thumb roller mechanism for smooth movement along the linear scale
    • Convenient to use locking screw to set calipers at any desired position
    • Measurement can be zero set at any position along the scale for incremental measurements
    GROZ EDC/8 - Electronic Caliper; 0-8in ( 0-200mm)
      GROZ - Electronic Caliper; 0-8in ( 0-200mm) Model # EDC/8

     
    • Freewheeling thumb roller mechanism for smooth movement along the linear scale
    • Convenient to use locking screw to set calipers at any desired position
    • Measurement can be zero set at any position along the scale for incremental measurements
    GROZ EDC/12 - Electronic Caliper; 0-12in (0-300mm)
      GROZ - Electronic Caliper; 0-12in (0-300mm) Model # EDC/12

     
    • Freewheeling thumb roller mechanism for smooth movement along the linear scale
    • Convenient to use locking screw to set calipers at any desired position
    • Measurement can be zero set at any position along the scale for incremental measurements
    GROZ MM/0-25 - Outside Micrometer, 0 – 25mm
      GROZ - Outside Micrometer, 0 – 25mm Model # MM/0-25

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/25-50 - Outside Micrometer; 25 – 50mm
      GROZ - Outside Micrometer; 25 – 50mm Model # MM/25-50

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/75-100 - Outside Micrometer; 75 – 100mm
      GROZ - Outside Micrometer; 75 – 100mm Model # MM/75-100

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/0-100/ST4 - Outside Micrometer Set 4pcs; 0-100mm
      GROZ - Outside Micrometer Set 4pcs; 0-100mm Model # MM/0-100/ST4

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/0-150/ST6 - Outside Micrometer Set 6pcs; 0-150mm
      GROZ - Outside Micrometer Set 6pcs; 0-150mm Model # MM/0-150/ST6

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MMED/1 - Electronic Micrometer; 0-1in (0-25mm); IP54
      GROZ - Electronic Micrometer; 0-1in (0-25mm); IP54 Model # MMED/1

     
    • Superior tool designed to measure, record & display dimensions in inches & mm
    • Extra large, high contrast LCD digital read out
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    GROZ CSQ/12/4/ST - Combination Square Set 4pcs; 12in/300mm
      GROZ - Combination Square Set 4pcs; 12in/300mm Model # CSQ/12/4/ST

     
    • An exceptional set which combines several tools, substituting the use of try squares, miter, depth gauge, height gauge, marking gauge, level, plumb & a precision rule
    • Constructed from Quality Cast Iron & complete with precision rule 12″ (300 mm) long
    • Center Head: Used for accurately locating center of a cylindrical or square work piece
    GROZ DLG/10 - Dial Indicator; 0-10mm; AGD2
      GROZ - Dial Indicator; 0-10mm; AGD2 Model # DLG/10

     
    • Each revolution is indicated by a revolution counter
    • 8mm stem diameter for metric models and 3/8″ for inch sizes
    • Robust construction, mechanical dial indicator with bottom plunger
    GROZ DGI/1 - Digital Indicator;  0-12.5mm/0-0.5in
      GROZ - Digital Indicator; 0-12.5mm/0-0.5in Model # DGI/1

     
    • A very versatile range of digital indicators available in two levels of precision – Standard & High Accuracy
    • Suitable for both inch & metric measurements
    • Useful for absolute & tolerance measurement which allows for measure of upper & lower tolerances
    GROZ MB/30 - Articulating Arm; W/M. Base Type1; 180mm
      GROZ - Articulating Arm; W/M. Base Type1; 180mm Model # MB/30

     
    • Equipped with convenient ON/OFF control switch
    • Three precision ground magnetic surfaces allow these to be used horizontally, vertically or even upside down
    • Articulating arm type: 3 articulating joints lockable using a single knob. Suitable for 3/8” & 8 mm stems & test indicators with dovetail clamping mechanism
    GROZ ID/10 - Inside Caliper 10in / 250mm
      GROZ - Inside Caliper 10in / 250mm Model # ID/10

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ ID/6 - Inside Caliper  6in / 150mm
      GROZ - Inside Caliper 6in / 150mm Model # ID/6

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ ID/8 - Inside Caliper 8in / 200mm
      GROZ - Inside Caliper 8in / 200mm Model # ID/8

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ OD/10 - Outside Caliper 10in / 250mm
      GROZ - Outside Caliper 10in / 250mm Model # OD/10

     
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    • Divider points are hardened 50-55 HRC for increased wear resistance
    • The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs
    GROZ OD/12 - Outside Caliper 12in / 300mm
      GROZ - Outside Caliper 12in / 300mm Model # OD/12

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs
    GROZ OD/6 - Outside Caliper 6in / 150mm
      GROZ - Outside Caliper 6in / 150mm Model # OD/6

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ OD/8 - Outside Caliper 8in / 200mm
      GROZ - Outside Caliper 8in / 200mm Model # OD/8

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ ID/12 - Inside Caliper 12in / 300mm
      GROZ - Inside Caliper 12in / 300mm Model # ID/12

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ DD/6 - Spring Divider  6″ / 150mm
      GROZ - Spring Divider 6″ / 150mm Model # DD/6

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ DD/8 - Spring Divider  8in / 200mm
      GROZ - Spring Divider 8in / 200mm Model # DD/8

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ WCF/WZ-6 - Center Finder Contour Set 4Pc Set
      GROZ - Center Finder Contour Set 4Pc Set Model # WCF/WZ-6

     
    • Wiggler with Disc Contact is particularly useful in locating work in confined areas such as slots or shallow holes. Diameter of Disc. 0.1″
    • Wiggler with Offset Indicator holder is useful for checking run out or concentricity and in checking straightness or alignment of flat surfaces
    • Wiggler with Ball Contact is useful in locating work by first bringing the ball contact against the work and then indexing it to the desired position relative to the spindle
    RIDGID 36158 - LM-100 Laser Distance Meter Range: 50m/164ft
      RIDGID - LM-100 Laser Distance Meter Range: 50m/164ft Catalog # 36158

     
    • Ultra-sharp Class II lasers clearly highlight point being measured
    • Exceptional distance range allows accurate measurements up to 164 ft (50 m)
    • Adjustable units enable you to quickly read feet, inches, or meters
    RIDGID 36248 - Torpedo Level 5-vial
      RIDGID - Torpedo Level 5-vial Catalog # 36248

     
    • Designed and built to last the toughest job conditions.
    • Heavy-duty structures are machined from a solid block of aluminum.
    • Provide accuracy; stability and provide the trade professional the ability to read 1/8″ ?? 1/2″ slope per foot.
    RIDGID 36813 - LM-400 Laser Distance Meter Range: 70m/229ft
      RIDGID - LM-400 Laser Distance Meter Range: 70m/229ft Catalog # 36813

     
    • Large backlit 4-line display provides clear view of measurements
    • Inclination angle measurement allows indirect measurements for hard to reach areas
    • Adjusts units instantly to inches, feet, or meters
    EXPERT E140105 - Tape Measure 3M
      EXPERT - Tape Measure 3M Model # E140105

     
    • Ergonomic chrome casing
    • Durable blade with nylon coating
    • Efficient blade lock
    EXPERT E140106 - Tape Measure 8M
      EXPERT - Tape Measure 8M Model # E140106

     
    • Ergonomic chrome casing
    • Durable blade with nylon coating
    • Efficient blade lock
    EXPERT E140601 - Measuring Vernier Caliper 6in
      EXPERT - Measuring Vernier Caliper 6in Model # E140601

     
    • Measurement capacity: 150 mm.
    • Interior; exterior and depth measurement.
    • Supplied in protection cover with compliance certificate.
    EXPERT E140801 - Stainless Steel Rule 200mm
      EXPERT - Stainless Steel Rule 200mm Model # E140801

     
    • Engraved on both sides.
    • mm and 1/2mm on each side.
    EXPERT E140902 - Carbide Pen Scriber 150mm – 190mm
      EXPERT - Carbide Pen Scriber 150mm – 190mm Model # E140902

     
    • arbide pen scriber.
    • Hex body with fastener.
    • Resharpenable tip
    EXPERT E161114 - Square Point 100mm
      EXPERT - Square Point 100mm Model # E161114

     
    • Anti slip soft grip handle.
    • Chrome-plated round blade.
    • Sharpened tip.
    UNI-T UT396B - Prof-Laser Distance Meter 120M
      UNI-T - Prof-Laser Distance Meter 120M Model # UT396B

     
    • UT396 serious is new professional multi-purpose laser distance meter with high precision.
    • It can measure distance, area, and even obtain volume data by using the Pythagorean Theorem.
    • It is portable, reliable,operationally simple and phase.
    DeWALT DW0811-XJ - 360, Line Laser with Vertical Line
      DeWALT - 360, Line Laser with Vertical Line Model # DW0811-XJ

     
    • Simulates functionality of rotary laser and projects bright crossing horizontal and vertical lines
    • 1/4″ and 5/8″ thread mounts for versatility
    • Locking pendulum to help prevent damage to internal components
    FLUKE 417D - Laser Distance Meter 40M(131 Ft.)
      FLUKE - Laser Distance Meter 40M(131 Ft.) Model # 417D

     
    • Instantly measure up to 40 m (131 ft.) with 1-button point-and-click
    • Continuous measurement capable: adjusting as you move closer and farther from your target
    • Quickly calculate area (sq feet/meters)
    UNI-T LM100 - Laser Distance Meter 100M
      UNI-T - Laser Distance Meter 100M Model # LM100

     
    • Ergonomic exterior, comfortable handling
    • Large, multiple angle HD display
    • Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
    UNI-T LM60 - Laser Distance Meter 60M
      UNI-T - Laser Distance Meter 60M Model # LM60

     
    • Ergonomic exterior, comfortable handling
    • Large, multiple angle HD display
    • Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
    UNI-T LM40 - Laser Distance Meter 40M
      UNI-T - Laser Distance Meter 40M Model # LM40

     
    • Large, multiple angle HD display
    • Quick, auto calculation with real-time readout
    • Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and mor
    UNI-T LM40T - Laser Type – Measuring Tape (40M/5M)
      UNI-T - Laser Type – Measuring Tape (40M/5M) Model # LM40T

     
    • One-button operation
    • Single measurement
    • Rear measurement reference
    STANLEY STHT33158-8 - 5M Powerlock Tape Measure
      STANLEY - 5M Powerlock Tape Measure Model # STHT33158-8

     
    • Mylar, polyester film extends life of entire blade
    • Chrome high-impact ABS case is job site tough
    • Secure blade lock won’t creep during measurements
    STANLEY STHT33428-8 - 8M Powerlock Tape Measure
      STANLEY - 8M Powerlock Tape Measure Model # STHT33428-8

     
    • High-impact chrome ABS case for tough onsite job
    • Mylar polyester film extend life of entire blade
    • Corrosion-resistant Tru-Zero® end hook for accurate measurements
    STANLEY STHT33463-8 - 10M Powerlock Tape Measure
      STANLEY - 10M Powerlock Tape Measure Model # STHT33463-8

     
    • Stanley STHT33463-8 PowerLock Tape comes with a 0.3 cm wide blade that allows clear and easy reading
    • Features both metric and imperial scales
    • Chrome-plated unit comes with 3-rivet end hook and positive blade look
    STANLEY STHT30696-8 - 5M Tylon Tape Measure
      STANLEY - 5M Tylon Tape Measure Model # STHT30696-8

     
    • Soft touch case
    • Tru-Zero hook for accurate inside and outside measurements
    • Tylon coated blade provide anti-glared reading
    STANLEY STHT30656-8 - 8M Tylon Tape Measure
      STANLEY - 8M Tylon Tape Measure Model # STHT30656-8

     
    • 3-rivet, corrosion-resistant hook moves for accurate inside/outside
    • ABS, shock-proof, chrome steel case
    • Compact, ergonomic case is 10% smaller than PowerLock classic
    STANLEY STHT34107-8 - 30M Steel Long Tape
      STANLEY - 30M Steel Long Tape Model # STHT34107-8

     
    • This Stanley Long Tape Rule has a 100′(30m) x 3/8″ blade
    • High impact, high visibility yellow ABS case
    • 3/8″ (10mm) wide yellow blade with polymer coating for durability
    STANLEY STHT34297-8 - 30M Fiberglass Measuring Tape
      STANLEY - 30M Fiberglass Measuring Tape Model # STHT34297-8

     
    • Stanley Closed Case Fiberglass Tape 30 m.
    • This closed case fiberglass long tape has 2-color graduations –
    • easy to read in all conditions.
    STANLEY STHT34263-8 - 50M Fiberglass Measuring Tape
      STANLEY - 50M Fiberglass Measuring Tape Model # STHT34263-8

     

    • High-impact case for durability

    • Reinforced fiberglass blade for accurate measurements

    • High visibility case make it easy to detect on the job

    STANLEY STHT43118-8 - 30CM Classic Box Beam Level
      STANLEY - 30CM Classic Box Beam Level Model # STHT43118-8

     
    • Block magnified center vial makes it easier to read
    • Vial accuracy : 0.5 mm/m
    • Large tubular side vials
    STANLEY STHT43103-8 - 60CM Classic Box Beam Level
      STANLEY - 60CM Classic Box Beam Level Model # STHT43103-8

     
    • Strong yet lightweight aluminum frame suitable for all-purpose durability
    • 2 plumb vials for easy readability
    • Center vial with 0.5 mm/1 m provides excellent accuracy
    STANLEY  STHT43102-8 - 40CM Classic Box Beam Level
      STANLEY - 40CM Classic Box Beam Level Model # STHT43102-8

     
    • Soft material used to make shock absorbing end caps
    • Center vial with 0.5 mm/1 m provides excellent accuracy
    • 2 plumb vials for easy readability
    STANLEY STHT43104-8 - 80CM Classic Box Beam Level
      STANLEY - 80CM Classic Box Beam Level Model # STHT43104-8

     
    • Soft material used to make shock absorbing end caps
    • Center vial with 0.5 mm/1 m provides excellent accuracy
    • 2 plumb vials for easy readability
    STANLEY STHT43105-8 - 100CM Classic Box Beam Level
      STANLEY - 100CM Classic Box Beam Level Model # STHT43105-8

     
    • Soft material used to make shock absorbing end caps
    • Center vial with 0.5 mm/1 m provides excellent accuracy
    • 2 plumb vials for easy readability
    STANLEY STHT43107-8 - 150CM Classic Box Beam Level
      STANLEY - 150CM Classic Box Beam Level Model # STHT43107-8

     
    • Soft material used to make shock absorbing end caps
    • Center vial with 0.5mm/1m provides excellent accuracy
    • 2 plumb vials for easy readability
    STANLEY STHT43106-8 - 120CM Classic Box Beam Level
      STANLEY - 120CM Classic Box Beam Level Model # STHT43106-8

     
    • Soft material used to make shock absorbing end caps
    • Center vial with 0.5mm/1m provides excellent accuracy
    • 2 plumb vials for easy readability
    STANLEY STHT43108-8 - 180CM Classic Box Beam Level
      STANLEY - 180CM Classic Box Beam Level Model # STHT43108-8

     
    • Soft material used to make shock absorbing end caps
    • Center vial with 0.5mm/1m provides excellent accuracy
    • 2 plumb vials for easy readability
    STANLEY STHT1-43110 - 40CM Aluminium Magnetic Level
      STANLEY - 40CM Aluminium Magnetic Level Model # STHT1-43110

     
    • Vial accuracy : 0.5 mm/m
    • Large tubular side vials
    • New shape box design
    STANLEY STHT43109-8 - 200CM Classic Box Beam Level
      STANLEY - 200CM Classic Box Beam Level Model # STHT43109-8

     
    • Soft material used to make shock absorbing end caps
    • Center vial with 0.5mm/1m provides excellent accuracy 2 plumb vials for easy readability
    • Strong yet lightweight aluminum frame suitable for all purpose durability
    STANLEY  1-42-314 - 60CM MLH Torpedo Level
      STANLEY - 60CM MLH Torpedo Level Model # 1-42-314

     
    • New shape and look for better ergonomics provides maximum durability – Improved design for a 21st century product
    • New shape is easier to grip for faster and more accurate readings
    • Magnified horizontal vial improves accuracy
    STANLEY STHT1-43111 - 60CM Aluminium Magnetic Level
      STANLEY - 60CM Aluminium Magnetic Level Model # STHT1-43111

     
    • Vial accuracy : 0.5mm/m
    • Large tubular side vials
    • New shape box design
    STANLEY 1-42-253 - 60CM TMLH Torpedo Level
      STANLEY - 60CM TMLH Torpedo Level Model # 1-42-253

     
    • Aluminum alloy rectangular level, light and resistant
    • 2 unbreakable Shockproof vials: one horizontal and one vertical
    • 2 machined soles
    STANLEY 0-43-609 - 250CM Magnetic Spirit Level
      STANLEY - 250CM Magnetic Spirit Level Model # 0-43-609

     
    • Die-cast aluminum body
    • Solid block vial provides accuracy of 0.0005 in/in. (0.5 mm/M)
    • 180 degree rotating vial to duplicate angles
    STANLEY 1-42-799 - 25CM Trapezoid Spirit Level
      STANLEY - 25CM Trapezoid Spirit Level Model # 1-42-799

     
    • Torpedo spirit level
    • Lightly extruded aluminum in T-shape
    • 2 tubular dragonflies (1x vertical and 1x horizontal)
    STANLEY 0-42-294 - 8IN Torpedo Level
      STANLEY - 8IN Torpedo Level Model # 0-42-294

     
    • Constructed of ABS plastic for impact resistance
    • Top-reading feature allows visibility from above
    • Tinted 360 ° vials for readability
    STANLEY STHT42465-8 - 9IN Magnetic Torpedo Level
      STANLEY - 9IN Magnetic Torpedo Level Model # STHT42465-8

     
    • Durable, heavy-duty, cast aluminum frame
    • Features large, top-read vial window
    • Tinted 360 ° vials make reading easy on the eyes
    STANLEY STHT47443-8 - 30M White/Blue Chalk Line
      STANLEY - 30M White/Blue Chalk Line Model # STHT47443-8

     
    • Stainless steel end hook for added durability and rust prevention
    • Sliding door for quick and easy refill
    • High impact ABS case for durability
    STANLEY STHT47403-8 - 115G Blue Chalk Refill
      STANLEY - 115G Blue Chalk Refill Model # STHT47403-8

     
    • Good resistance to all atmospheric conditions
    • Powder specially formulated for good adhesion and high visibility
    • Waster Resistant
    STANLEY STHT47404-8 - 115G Red Chalk Refill
      STANLEY - 115G Red Chalk Refill Model # STHT47404-8

     
    • Good resistance to all atmospheric conditions
    • Powder specially formulated for good adhesion and high visibility
    • Waster Resistant
    STANLEY 1-77-174 - 10000M Measuring Wheel
      STANLEY - 10000M Measuring Wheel Model # 1-77-174

     
    • 5 digit counter with manual reset button for superb accuracy
    • Die cast Aluminium wheel with wear resistant rubber tread for improved traction & longer life
    • Folding Kick stand
    STANLEY 1-77-176 - DMW30 Digital Measuring Wheel
      STANLEY - DMW30 Digital Measuring Wheel Model # 1-77-176

     
    • Automatic conversion of units of measurement
    • Stores up to 8 measurements in memory
    • Auto power off after 2 minutes of suspended use
    DeWALT DW099S-XJ - LINE DISTANCE MEASURER LASER 100FT/30M
      DeWALT - LINE DISTANCE MEASURER LASER 100FT/30M Model # DW099S-XJ

     

    Measure distances of up to 100′ quickly and easily with the DEWALT Tool Connect 100 Ft Laser Distance Measurer. It can calculate area and volume as well as perform simple addition and subtraction functions.

    DeWALT DW03601-XJ - 360 DEGREE RED BEAM CROSS LINE LASER
      DeWALT - 360 DEGREE RED BEAM CROSS LINE LASER Model # DW03601-XJ

     
    • It can be used for a wide variety of projects from basic remodeling to woodworking to installing drywall.
    • This laser has a locking pendulum and over-molded housing to protect it from drops.
    • It includes an integrated bracket making it easy to mount on various surfaces.
    DeWALT DCE079D1R-QW - Laser Rotary 18V Red
      DeWALT - Laser Rotary 18V Red Model # DCE079D1R-QW

     

    Rotary laser with red beam, self-leveling with horizontal beam, and lead.

    Suitable to all applications both in outdoor and indoor spaces. Protection class IP67.

    GAZELLE G9501 - Laser Tape Distance Meter
      GAZELLE - Laser Tape Distance Meter Model # G9501

     

    This product has been discontinued by the manufacturer.

    • One-button operation
    • Single measurement
    • Rear measurement reference
    UNI-T LR1500 - Laser Rangefinder Distance Meter Monocular Telescope Ranging Speed Tester
      UNI-T - Laser Rangefinder Distance Meter Monocular Telescope Ranging Speed Tester Model # LR1500

     

    This product has been discontinued by the manufacturer.

    • Multi-functional LCD sighting telescope
    • Measure height, speed, distance and angle
    • Silent operation and auto shut off
    GAZELLE G80106 - 10ft Measuring Tape (3m)
      GAZELLE - 10ft Measuring Tape (3m) Model # G80106

     
    • Ergonomically designed case.
    • Ergonomically designed case.
    • Bi-material tape measure.
    GAZELLE G80171 - 16ft Measuring Tape (5m)
      GAZELLE - 16ft Measuring Tape (5m) Model # G80171

     
    • Ergonomically designed case
    • Push button retrieval
    • Bi-material tape measure
    GAZELLE G80172 - 26ft Measuring Tape (8m)
      GAZELLE - 26ft Measuring Tape (8m) Model # G80172

     
    • Ergonomically designed case
    • Push button retrieval
    • Bi-material tape measure
    DeWALT DE0881T-XJ - 1/4″ Thread Lightweight Mini Tripod
      DeWALT - 1/4″ Thread Lightweight Mini Tripod Model # DE0881T-XJ

     
    • Tripod with 1/4″ – 20 mounting threads
    • Extends between 0.75M to 1.84M
    • The head can tilt and adjust for quick and easy movement
    GAZELLE G80219 - 48 In. Stainless Steel Ruler (120cm)
      GAZELLE - 48 In. Stainless Steel Ruler (120cm) Model # G80219

     
    • Stainless steel
    • Permanently etched graduation
    GAZELLE G80220 - 9 In. Aluminum Frame Torpedo Level (20cm)
      GAZELLE - 9 In. Aluminum Frame Torpedo Level (20cm) Model # G80220

     
    • Acrylic vials read plumb, level, 45°
    • Top read window for convenience
    • V-groove working edge fits on pipe or conduit
    • Highly visible vials with magnetic base
    GAZELLE G80221 - 12 In. Magnetic Aluminum Box Level (30cm)
      GAZELLE - 12 In. Magnetic Aluminum Box Level (30cm) Model # G80221

     
    • Milled surface for improved precision
    • Magnets in the base allow for attaching to metal surfaces
    • Large, easy to read vials
    • Advanced structural aluminum frame
    GAZELLE G80222 - 24 In. Magnetic Aluminum Box Level (60cm)
      GAZELLE - 24 In. Magnetic Aluminum Box Level (60cm) Model # G80222

     
    • Milled surface for improved precision
    • Magnets in the base allow for attaching to metal surfaces
    • Large, easy to read vials
    • Advanced structural aluminum frame
    GAZELLE G80223 - 48 In. Magnetic Aluminum Box Level (120cm)
      GAZELLE - 48 In. Magnetic Aluminum Box Level (120cm) Model # G80223

     
    • Milled surface for improved precision
    • Magnets in the base allow for attaching to metal surfaces
    • Large, easy to read vials
    • Advanced structural aluminum frame
    GAZELLE G80224 - 6 In. Vernier Caliper (150mm)
    GAZELLE G80258 - 10 In. Inside Caliper (250mm)
      GAZELLE - 10 In. Inside Caliper (250mm) Model # G80258

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80259 - 12 In. Inside Caliper (300mm)
      GAZELLE - 12 In. Inside Caliper (300mm) Model # G80259

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80260 - 6 In. Inside Caliper (150mm)
      GAZELLE - 6 In. Inside Caliper (150mm) Model # G80260

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80261 - 8 In. Inside Caliper (200mm)
      GAZELLE - 8 In. Inside Caliper (200mm) Model # G80261

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80262 - 10 In. Outside Caliper (250mm)
      GAZELLE - 10 In. Outside Caliper (250mm) Model # G80262

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80263 - 12 In. Outside Caliper (300mm)
      GAZELLE - 12 In. Outside Caliper (300mm) Model # G80263

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80264 - 6 In. Outside Caliper (150mm)
      GAZELLE - 6 In. Outside Caliper (150mm) Model # G80264

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80265 - 8 In. Outside Caliper (200mm)
      GAZELLE - 8 In. Outside Caliper (200mm) Model # G80265

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80266 - 6 In. Spring Divider (150mm)
      GAZELLE - 6 In. Spring Divider (150mm) Model # G80266

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80267 - 8 In. Spring Divider (200mm)
      GAZELLE - 8 In. Spring Divider (200mm) Model # G80267

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    PCE Instruments LDM 80 - Distance Meter with Datalogger – 80M
      PCE Instruments - Distance Meter with Datalogger – 80M Model # LDM 80

     
    • The distance meter has a large measuring range of 80 m / 262.5 ft. and has many other measurement functions. It has a built-in inclination sensor that can carry out both vertical and horizontal distance measurements which means that precise measurements can be carried out with the distance meter even on hard-to-reach areas.
    • With the built-in digital camera, the measuring point can be enlarged on the display of the distance meter, making it easier to aim at the measuring point. The batteries included in the scope of delivery can also be charged via the micro USB interface from the distance meter.
    • With the data logger function, the measured distances from the distance meter can be saved at the push of a button and stored measured values ​​can be connected directly to a computer via the micro USB interface.
    PCE Instruments LRF 500 - Laser Rangefinder Distance Meter – 600M
      PCE Instruments - Laser Rangefinder Distance Meter – 600M Model # LRF 500

     

    This product has been discontinued by the manufacturer.

    • The laser rangefinder PCE-LRF 500 is an optimal tool for distance measurement in the leisure sector. It is very well suited for distance determination on walks, bike rides or hunting.
    • The laser rangefinder has a measuring range of up to 600 m / 1,968 ft. and can measure the speed of objects moving toward or away from the user.
    • To measure distances in the fog, the PCE-LRF 500 Laser Rangefinder has a special fog mode. This laser rangefinder has a sturdy plastic housing.
    • For better handling when carrying the rangefinder, a wrist strap is included. This meter is powered by 2 x 1.5V AAA batteries.
    PCE Instruments LRF 600 - Laser Rangefinder Distance Meter – 800M
      PCE Instruments - Laser Rangefinder Distance Meter – 800M Model # LRF 600

     

    This product has been discontinued by the manufacturer.

    • PCE-LRF 600 is a metric-only range-finding distance meter that not only measures distance, but also determines the speed of moving objects.
    • Ideal for hunting, shooting, golfing and more, these compact laser range-finding binoculars make great gifts for sports and outdoor enthusiasts.
    • Distance measurement range: 6 to 800 m; Distance measurement accuracy: ±1 m; ± 0.2%
    • Speed measurement range: 0 to 300 km/h; Speed measurement accuracy: ±1 km/h
    GAZELLE G9503 - Red Laser Distance Meter, 50m
      GAZELLE - Red Laser Distance Meter, 50m Model # G9503

     
    • Quick, self calculation with real-time readout
    • Physical leveler (Horizontal and vertical)
    • Multiple functions: Max/Min/continuous measurement, data storage, etc
    GAZELLE G9504 - Red Laser Distance Meter, 100m
      GAZELLE - Red Laser Distance Meter, 100m Model # G9504

     
    • Quick, self calculation with real-time readout
    • Physical leveler (Horizontal and vertical)
    • Multiple functions: Max/Min/continuous measurement, data storage, etc
    GAZELLE G9505 - Crossline Green Laser Level, 10m
      GAZELLE - Crossline Green Laser Level, 10m Model # G9505

     
    • Self-leveling mode & manual mode
    • Outdoor pulse mode
    • Class 2 green laser
    GAZELLE G9506 - Crossline Green Laser Level, 40m
      GAZELLE - Crossline Green Laser Level, 40m Model # G9506

     
    • Self-leveling mode & manual mode
    • Outdoor pulse mode
    • Class 2 green laser
    GAZELLE G9903 - 1.5m Gazelle Universal Tripod
      GAZELLE - 1.5m Gazelle Universal Tripod Model # G9903

     
    • Adjustable height 600 mm to 1500 mm
    • Four-section lever-lock legs provide flexibility
    • Universal interface 5/8 screw
    • Reinforcement support design
    DeWALT DW033-XJ - Laser Distance Meter 30M
      DeWALT - Laser Distance Meter 30M Model # DW033-XJ

     
    • Precise distance measurement is guaranteed with the DW033 that’s accurate to ±3mm/m in distance calculation.
    • With a range of 30m it’s ideal for quick, accurate measurements on-site.
    DeWALT DW0822-XJ - 2-Ways Self-Levelling Line and Plumb Spots Laser
      DeWALT - 2-Ways Self-Levelling Line and Plumb Spots Laser Model # DW0822-XJ

     
    • Full-time pulse mode allows use with detector – Detector Maintains full brightness for visibility
    • Locking Pendulum – To help prevent damage to internal components
    DeWALT DE0882-XJ - 1/4 Inch Thread Laser Pole
      DeWALT - 1/4 Inch Thread Laser Pole Model # DE0882-XJ

     
    • 360 degree horizontal rotation with no height change
    • Maximum height of 3.3m
    • Reinforced fixing arm platform, locking mechanism and sections connecting material
    GAZELLE G80294 - 30m Fiberglass Measuring Tape
      GAZELLE - 30m Fiberglass Measuring Tape Model # G80294

     
    • 30m Fiberglass Measuring Tape
    GAZELLE G80295 - 50m Fiberglass Measuring Tape
      GAZELLE - 50m Fiberglass Measuring Tape Model # G80295

     
    • 50m Fiberglass Measuring Tape
    GAZELLE G80296 - 6 In. Digital Vernier Caliper (150mm)
      GAZELLE - 6 In. Digital Vernier Caliper (150mm) Model # G80296

     
    • Digital Vernier Caliper
    GAZELLE G9505-II - 30m Green Laser Level, Self Leveling, 2 Lines with Horizontal, Vertical and Crossline Projections
      GAZELLE - 30m Green Laser Level, Self Leveling, 2 Lines with Horizontal, Vertical and Crossline Projections Model # G9505-II

     
    • Laser brightness adjustable 3 levels of saving mode
    • Double condenser lens, object modes, horizontal or vertical or cross line laser can be selected
    • The vertical line passes through the ceiling, easy for ceiling construction laying process
    GAZELLE G9506-II - 60m Green Laser Level, Self Leveling, 12 3D Lines with Horizontal, Vertical and Crossline Projections
      GAZELLE - 60m Green Laser Level, Self Leveling, 12 3D Lines with Horizontal, Vertical and Crossline Projections Model # G9506-II

     
    • Multifunctional laser tools 3 x 360° 3D green laser
    • Power saving outdoor pulse mode
    • Self leveling and manual mode, ideal for tilting laser lines manually at any angle
    GAZELLE G9503-II - Red Laser Distance Meter, 60m, with 3x 1.5V AAA Batteries
      GAZELLE - Red Laser Distance Meter, 60m, with 3x 1.5V AAA Batteries Model # G9503-II

     
    • Measuring range upto 60m with an accuracy of ±2mm.
    • Ergonomic exterior with an intuitive LCD display.
    • Can measure in single/continuous mode with real-time readout.
    GAZELLE G9504-II - Red Laser Distance Meter, 120m, with 3x 1.5V AAA Batteries
      GAZELLE - Red Laser Distance Meter, 120m, with 3x 1.5V AAA Batteries Model # G9504-II

     
    • Measuring range upto 120m with an accuracy of ±2mm.
    • Ergonomic exterior with an intuitive LCD display.
    • Can measure in single/continuous mode with real-time readout.
    Bosch GLM 50-27 CG - Green Laser Rangefinder, 50m, IP 65
      Bosch - Green Laser Rangefinder, 50m, IP 65 Model # GLM 50-27 CG

     
    • Robust & reliable laser measure with green laser for excellent visibility
    • Green laser technology ensures excellent visibility for long-distance measurements in bright indoor conditions
    Bosch GLM 150-27 C - Red Laser Rangefinder, 150m, IP 54
      Bosch - Red Laser Rangefinder, 150m, IP 54 Model # GLM 150-27 C

     
    • Advanced laser measure for long distances even outdoors with smart documentation
    • Precise, long-distance laser measuring thanks to digital camera viewfinder with zoom function

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      When preparing and organizing a job site, experienced professionals never improvise or guesstimate the distances and dimensions. Precision is the most important factor that gives engineers and technicians the ideal head start needed to ensure efficiency once work commences. Correct measurements also allow professionals to save material while realizing outside plant jobs. Some must have professional measuring equipment includes laser distance meters, laser levels, rulers and squares, and classic box levels.

       

      Advantages:

      • Provides high precision and accuracy
      • Helps in planning and organizing
      • Saves direct costs of materials
      • Portable
      • Easy to set up

       

      Who uses Measuring and Marking Tools?

      • Engineers
      • Handymen
      • Landscapers
      • Masons
      • Developers
      • Electrical workers
      • HVAC technicians
      • Electricians

       

      Where are Measuring and Marking Tools used?

      • Construction sites
      • Workshops
      • Facilities

       

      How to safely use Measuring and Marking Tools?

      • Make sure your devices are calibrated annually to ensure greater precision levels
      • Keep measuring instruments stored away from vibration as it may cause digital measuring devices to fall out of calibration over time
      • Store measuring tools at room temperature to ensure accuracy is maintained
      • Be careful about laying or using tools close to magnets or a magnetized surface
      • Clean tools after use
      • Do not bang, throw or bang the device on a hard surface

       

      Measuring and Marking tools from Gazelle, Expert, DeWalt and Irwin are available at our retail stores across the United Arab Emirates in Dubai, Sharjah, and Abu Dhabi.

       

      AABTools is the top hand tools distributor in UAE. Measuring and Marking tools like levels, ruling and squares, levels and alignment, laser distance meter, measuring tapes and wheels, chalk reels and scribing are available at AABTools. Shop now for the top measuring and marking tools by Gazelle, Expert, DeWalt and Irwin at our retail stores in Dubai, Sharjah, and Abu Dhabi.