||
Ridgid 35170 Ratchet Bender, 5/8 Inches
Model # 35170Key Features
?
Question about this product?
Features
- Designed to bend heavy-wall steel tube (up to 1/8 Inches wall thickness), stainless steel tube (up to 3/32 Inches wall thickness), and hard copper water tube (types K and L)
- Produces uniform bends up to 180° with no need to anneal tubing or to use special temper grade tubing
- High-geared design is easy to operate with minimal effort required
- Marked with inch and metric sizes
- Tube outside diameter: 5/8 Inches (16 mm)
- Benders produce uniform bends up to 180° with no need to anneal tubing or use special temper grade tubing.
- Reduce bending effort to a minimum.
Technical Information
- Bend Angle0 to 180 Deg.
- Calibration Increments15 Degrees
- Centerline Bend Radius3 Inches
- ConstructionCast Aluminum
- Handle TypeLong, Non-cushioned
- MarkingsCalibrated Angle Markings From 0 to 180 Degrees
- Outside Diameter Tubing5/8 Inches
- Overall Length22 Inches
- TypeGeared Ratchet
Items Included
- 1- RIDGID 358 Geared Ratchet Tube Bender, 3 Inches (76mm)