||

Fluke 87V/I410/L215 True RMS Industrial Multimeter, CAT IV 600V, 10A + AC/DC Current Clamp And Carry Case Kit (400 A) + Suregrip Kit With Probe Light And Probe Extender
Model # 87V/I410/L215Key Features
?
Question about this product?
Features
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05 % dc accuracy
- 4-1/2 digit mode for precise measurements
- Analog bar graph for fast changing or unstable signals
- Large digit display with bright, two-level backlight for easier reading in low light
- Touch Hold keeps readings on display even after removing probes
- Battery-powered Hall-effect probe measures 1A to 400 A
- 1mV/Amp output guarantees easy reading on your meter
- Take accurate current readings without breaking the circuit
- Maximum conductor Ø 32 mm
- CAT III 600 V safety rating
- L200 Probe Light
- Tp280 20 cm Test Probe Extenders
- TP220 SureGrip Test Probes
- TL224 SureGrip Silicon Test Lead Set
- Foldable soft pouch with six pockets and hook-and-loop
Technical Information
- DC Voltage 1000V
- Voltage AC 1000V
- Resistance 50 MΩ
- Capacitance 9,999 μF
- Frequency 200 kHz
- Temperature –200.0 °C – 1090 °C excluding probe
- 80 BK temperature probe –40.0 °C – 260 °C –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater
- Measurement Type Hall sensor
- Nominal Current Range 400 A, AC/DC
- Continuous Current Range 1 to 400 A AC/DC
- Maximum Non-Destructive Current 400 A
- Lowest Measurable Current 0.5 A
- Basic Accuracy 3.5% + 0.5 A (% reading + floor spec)
- Useable Frequency DC - 3 kHz
- Output Level(s) 1 mV/A
- Maximum Voltage 600 V
Items Included
- Fluke TL75 Test Leads AC175 Alligator Clips Holster 9V Battery (Installed) 80BK Temperature Probe
- Fluke i410 AC/DC Current Clamp
- Fluke L215 SureGrip™ Kit with Probe Light and Probe Extenders