Fluke 772 Milliamp Process Clamp Meter, 0 to 20.99mA

Features

• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without breaking the loop
• Measure mA signals for PLC and control system analog I/O
• Simulates 4-20 mA signals for testing control system I/O
• Sources 4 to 20 mA signals for testing control system I/O or I/Ps
• Includes simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
• Features a detachable clamp with extension cable for measurements in tight locations
• Captures and displays changing measurements with Hold function

Technical Information

• Current Measurement0 to 20.99 mA, measured with clamp
• Current Measurement0 to 24 mA, measured in series with test jacks
• Diameter of measurable conductor0.177” or 4.5 mm max
• Operating temperature-10 to 50ºC
• Storage temperature-25 to 60ºC
• Operating humidity< 90% @ <30ºC, < 75% @ 30 to 55ºC
• Operating altitude0 to 2000 m
• Size44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in)
• VibrationRandom 2 g, 5 to 500 Hz
• Temperature coefficient0.01% ºC (< 18ºC or > 28ºC)
• Power, battery life(4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
• Resolution / range0 to 20.99 mA

Items Included

• Four AA alkaline batteries (installed Soft carrying case
• TL75 test leads
• AC 72 detachable clip
• TL 940 mini hook test leads
• Instruction sheet
• Hanging tool with hook and loop strap

Downloads

CertificateCertificate